How to use your tablet as a computer screen monitor

How to use your tablet as a computer screen monitor - It is not a phone to game on due to the low powered internals, but it copes with video fine. The display is quite washed out, but the clean Android software makes up for this. You won’t want to post many pictures from the not-great camera on Instagram, but if you want a decent snapper, you’ll look at phones that cost more. from a flagship phone, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about How to use your tablet as a computer screen monitor, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

Samsung released the official Android 4.4.2 KitKat update for that Galaxy Tab 4 7.0 T230 together with build version XXU0ANG1.

So, Here we mention the step by set guide to the firmware manually in the case of automatic update didn't work.

Requirements:

Step 1. Just flash the firmware manually for the "Samsung Galaxy" Tab 4 7.0 T230 Wi-Fi only.

2. Make a manual backup from all data files as well as personal settings stored in the Galaxy tablet.

3.      The particular battery level has to be at least 50 percent to avoid electric power interruption during the set up.

4.      Now Enable USB debugging mode on the tablet that you can get under the Settings menu.

5.      Download the important USB drivers for Galaxy Tab 4 7. 0 T230 Wi-Fi model on the computer. If your Samsung Kies is

already installed on the machine, connect it using any USB cable for installing  the drivers.

6.      Now you must download the "ODIN flash tool version 3.09" as well as the official Android 4.4.2 XXU0ANG1 KitKat firmware on your personal computer or laptop.

Notice: We are not in charge of any errors that might occur on the device. Read and must follow to the instructions to any avoid issue. Do this at the own risk!!

Flashing Instructions:

1.      Now Switch off the Samsung Galaxy Tab 4 7. 0 T230 Wi-Fi.

2.      Restart into Download mode by pressing as well as holding volume upwards and power keys simultaneously till the

Smartphone logo appears.

3.      Now just Extract the ODIN flash tool files and also the official Android 4.4.2 KitKat firmware for an easy access location on

your  p.computer or laptop.

4.      Start the ODIN flash tool on the pc.

5.      Hook up the Samsung Galaxy Tablet 4 7. 0 on your computer using a USB cable.

6.     IDENTITY: COM should turn yellow if device is actually detected by this computer. Otherwise, install the necessary USB drivers as mentionened above.

For the ODIN flash application, select the following files to the installation:

• Click "PDA" then select the file with (CODE) in its name.
• Click "PHONE" then select the file with (MODEM) in its name. If not found, ignore this step.
• Click CSC then select the file with CSC in its name. If you couldn't found. So, don't bother just ignore this step.
• Hit on "PIT" then select the ".pit" file. If not found, ignore this step too.

8.      Check on the (AUTO REBOOT) and "F.RESET TIME" on the ODIN flash tool.

9.      DO NOT check the RE-PARTITION option within the ODIN flash tool when there is NO ". pit" data file used.

10.  Now Click on the start button to start installation for the ODIN tool.

11.  After you done the installation, the tablet may restart automatically which could take up five minutes before reaching properly

to the home screen section.

12.  In the case tablet reaches the home screen, Now you can unplugged it throughout the USB connection.

Congrats, Now You're Done!!